How To Fix Table Tennis Ball


Are you looking for a way to fix your table tennis ball? Whether the ball has become worn from regular use, or if it is damaged by other factors, there are some steps you can take to bring it back to life. In this article, we’ll cover the basics of how to clean, patch, refill, reseal and resurface your table tennis ball. With these simple tips and tricks, you can get your old ball back in play in no time! So let’s dive right into it and learn how to fix your table tennis ball.


Cleaning the object is an essential step for restoring it to its original condition, and it shouldn’t be overlooked. When cleaning a table tennis ball, there are a few items you will need – water, detergent or soap, and a soft cloth or brush. Begin by gently rinsing the surface of the ball with warm water. After that, apply some liquid detergent or soap onto the surface of the ball and use your hands to rub out any dirt particles that may have gotten stuck into its texture. Once done, rinse off all of the residue using warm water then dry using a soft cloth or brush. There are other drying techniques that can also be used such as air drying or even wiping down with a paper towel but these should only be used if no other options are available. It is important to take care when cleaning your table tennis ball so as not to damage its outer layer.

If your table tennis ball has been exposed to harsh chemicals like chlorine, it is best to avoid any type of chemical cleaners as this could potentially cause further damage than good. The best way to clean a chemically-treated table tennis ball is by soaking it in distilled white vinegar for 10 minutes followed by rinsing off with cold water before drying with either air-drying or wiping down with a paper towel. This method should help remove any residue left over from chlorine exposure without damaging the outer layer of the ball too much in the process.

Maintaining your table tennis balls regularly will help extend their life expectancy which means they won’t need replacing as often. Cleaning them properly after every use will ensure they remain in good condition and can withstand long hours playing on court without breaking apart!


Repairing a ping pong sphere can be tricky, but patching it up is an essential part of the process. You’ll need to get a replacement foam layer and some sealing glue. To start, take off the old foam by peeling it away from the ball’s surface. Once you’ve removed it, cut out a piece of new foam that is slightly larger than where you peeled the old foam away from. Apply the glue along the edges and press down to ensure a secure fit. Then, use scissors or a sharp knife to trim around any excess pieces of foam that hang over the sides of the ball.

Next, apply a thin coat of glue onto both sides of your patch and place them on top of each other before sticking them onto your table tennis ball. Make sure each side has been evenly covered with adhesive so that there are no gaps in between them when pressed together. Finally, give your newly patched sphere some time to dry completely – this should take about 24 hours for best results. If done correctly, your patched up table tennis ball should work just as well as before!


Once your patched-up sphere is dry, it’s time to give it new life with a refill! With just a few simple steps, you’ll be able to get your bouncing buddy back in action. To start, you will need an air pump and some table tennis ball inflation tips. You can find both of these items at most sporting goods stores or online.

Next, attach the inflation tip to the air pump and hold the tip over the valve stem on your ball. Slowly start pumping air into your table tennis ball until it is firm but not too tight. Be careful not to overinflate as this can cause damage to your equipment. Once you have achieved the desired pressure level, carefully remove the inflation tip from the valve stem and store it away for future use.

After refilling your table tennis ball, make sure you store it properly so that it does not become damaged or deflated again. Keep it in its box away from direct sunlight and heat sources such as radiators or stoves. Also avoid storing near sharp objects like knives which could puncture through the cover of the ball and cause irreparable damage!


Now that your ball is refilled, it’s time to re-seal it so you can get back to playing! Re-sealing a table tennis ball is an important step in ensuring optimal performance of the ball. This will help ensure that the air pressure inside the ball remains consistent and won’t leak out during play. To start, make sure you have all the necessary materials: a Phillips head screwdriver, thread lock compound, and two rubber gaskets.

Next, use the screwdriver to remove the caps from both ends of the table tennis ball. Then apply a small amount of thread lock compound around each end cap before replacing them on their respective ends of the ball. You should also replace one or both rubber gaskets if they are worn or damaged. Once everything is in place, firmly tighten the end caps using your screwdriver until they are secure but don’t over-tighten as this can cause damage to them and compromise air pressure within the ball.

Finally, give each endcap several turns with your fingers for added security. Now you should be ready to hit some balls! Re-sealing your table tennis balls regularly will help keep their bounce consistent and keep you at peak competitive performance during games.


With a few simple steps, you can have your sports ball back in top shape and ready to go! Resurfacing a table tennis ball is an important part of maintaining it. This process involves polishing the surface of the ball to remove any scratches or markings that affect its performance. Depending on how much damage has been done, you may need to replace the entire shell of the ball if it’s become too worn down.

The first step for resurfacing a table tennis ball is to make sure it’s completely clean and free from dirt or other debris. You can use a soft cloth and warm water to gently wipe away any grime or residue from the surface of the ball. Once it’s thoroughly cleaned, you can move onto polishing with either an abrasive cleaning solution or a fine steel wool pad. Be sure not to use anything too harsh as this could damage the material of your table tennis ball.

Once you’ve buffed out any imperfections, your table tennis ball should look like new again! If there are still some noticeable marks or scratches on the surface, then you may want to consider replacing the entire shell before using it again in competition. It’s important that your balls always meet official regulations for size and bounce when playing competitively so that you get optimal performance from them during each game.

Frequently Asked Questions

What type of glue should I use to patch a table tennis ball?

If you’re looking to patch a table tennis ball, it’s important to select the right adhesive. Depending on the severity of your tear or hole, you may want to use something that offers more flexibility than traditional glue. For any patching job, it’s best to choose a specialized rubber adhesive designed for these types of repairs. Rubber-toughened adhesives will help keep the patch securely bonded and offer improved resistance against shock and vibration. With proper technique, this type of adhesive will be able to fix even large tears with minimal effort.

How often should I clean my table tennis ball?

Cleaning your table tennis ball is an important part of maintaining the quality of your game and the life span of your equipment. It’s recommended that you clean your ball after every few games, or at least once a month if you are not playing often. This can help keep dirt and oils from building up on the surface which will cause it to lose its bounce over time, as well as reduce the effectiveness of replacing rubbers and other playing techniques. To clean, simply use a damp cloth with some mild detergent to wipe down the ball until it looks shiny again.

How do I know when my table tennis ball needs to be refilled?

If you’re a table tennis enthusiast, you may have experienced hitting accuracy diminishing over time. It’s important to periodically check for signs that your table tennis ball needs to be refilled. These signs include noticeably less bounce, decreased spin and speed, and even a change in the shape of the ball. If any of these signs are present, it’s time to replace your ball with a new one!

Is it possible to re-seal a table tennis ball?

You may be wondering if it’s possible to re-seal a table tennis ball, and the answer is yes! Re-sealing a table tennis ball requires playing techniques that involve pressing down on the seams of the ball so that they stick together. It’s important to note, however, that even after being re-sealed, the bounce of the ball may not be as good as it was before. This is because some air will remain inside and this can affect how much energy is transferred from your racket to the ball when you hit it. If you’re looking for improved playing performance from your table tennis balls, it might be best to invest in new ones instead of attempting to reseal them.

What type of materials do I need to resurface a table tennis ball?

Surface preparation and patch repair are two key components of fixing a table tennis ball. To resurface your table tennis ball, you will need sandpaper, adhesive putty, and a sealant. Start by lightly sanding the surface of your ball until it is even and smooth. Apply the adhesive putty to any holes or cracks in the ball. Once dried, use a sealant to cover the entire surface area of your ball and let dry completely before using again. With these materials and techniques, you can quickly fix up any damaged table tennis balls for future use!


You’ve now taken the time to fix up your table tennis ball and get it back in perfect condition. You have cleaned, patched, refilled, re-sealed, and resurfaced the ball to make sure it’s as good as new. You can be proud of yourself for taking on a difficult task and completing it successfully. Now you can enjoy playing with a perfectly functioning table tennis ball that will last for years to come. So take advantage of this opportunity and play often – you won’t regret it!